Dodge Aspen 1980 "Air Morse One"

Overdrive.fi on harrasteautoiluun keskittyvä verkkosivusto, joka tarjoaa sisältöä harrastajien ja rakentajien tarpeisiin. Epäasiallinen ja loukkaava sisältö, joka rikkoo sivuston käyttöehtoja, poistetaan. Näin eivät myöskään poliittinen keskustelu ja aiheet sinne kuulu. Harrastus on yhteinen poliittisesta kannasta riippumatta. Overdriven yleiset käyttöehdot löytyvät täältä, ja on hyvä muistaa, että jokainen keskustelija on rikos- ja vahingonkorvausoikeudellisessa vastuussa omien viestiensä sisällöstä.

Ketju osiossa 'Projektit', aloittaja JarmoN, 3.8.2016.

  1. JarmoN

    JarmoN Gearhead

    Moro

    Olen lähetetty joitakin kuvia Hienoja Aspeneita threadissä ja päätin, että ehkä nyt on aika tehdä projekti thread myös.

    1980 Ass-pen, 225 slant six, 904.
    Ainoa 1980 Aspen Virossa, toiset kaksi täällä ovat vanhempaat.

    Kone on rempaattu, drives nicely. Halpaa Flowmaster 40 knock-off vaimentin pörisee kauniisti.

    Taka-akselin DIY-ilmajousitus - Scanian baggeja, Patrolin 4-linkki, Eldoradon iskunvaimentimet etc.
    Ilmajousitus on rakennetu CSG-Customsissa, (Räyskälä Vintage Dragsillä "Toad Runner" Valiantin kuskin yritys).

    Vanteet ovat 15x6 Supremet, renkaat 165/80. Tulevaisuudessa haluan kokeilla myös 14" Star Wire tai True Spokesia.

    Sisusta on hetkella stock, vain ratti on Mooneyesin purple flake ja serape-peitot penkeillä.

    Straippaukset ja katon maalaus on mun tehty, katto tarvitse viela töita.
    Tässä mun yrityksen linkkit:
    http://www.kustom.ee
    http://www.facebook.com/oneeyedmorse
    Instagram: oneeyedmorse



    Monta räpsyä

    [​IMG]

    "Air Morse One" ja Pekka Mannermaa's "Visual Harassment" Riviera Räyskälässä
    [​IMG]

    [​IMG]


    Using the Aspen's trunk as a table for pinstriping the customer's toolbox at the Do-Dads Reunion 2016:
    [​IMG]

    [​IMG]

    [​IMG]



    [​IMG]

    [​IMG]

    [​IMG]
     
    HendriXXX, Vezques, Pertti K ja 9 muuta käyttäjää tykkäävät tästä.
  2. bottipoika

    bottipoika 2nd gear

    nää vanhan koulukunnan straipit ja maalaukset kolisee kyllä kypällä
    aivan pirun komeeta täytyy sanoo
     
    MadMike tykkää tästä.
  3. C-barge

    C-barge Gearhead

    Jees, kiinnittänyt kyllä minunkin huomiota. Harmi ettei ite ehtinyt viime viikonloppuna do dad'seihin. Asenne kohdallaan!
     
  4. Rusty

    Rusty Double Gearhead

    Onko Aspeni Forssan pick-nickissä sunnuntaina?
     
  5. FuryIII '71

    FuryIII '71 Double Gearhead

    Hieno on edelleen. Veispuukissa joku "asiantuntija" haukkui tämän jo "linttapaskaläntäksi" kun kuvassa oli jousitus ala-asennossa...

    Saatoin ehkä hieman avautua kyseiselle henkilölle. :oops:
     
    wilburi tykkää tästä.
  6. JarmoN

    JarmoN Gearhead

    Hehehe. Missä see löytyy FB-ssä?
    By the way, mitä see linttapaskaläntä tarkoittaa? Vähän ymmärrän, mut ei totally. Slängisana se?



    Rusty - Stadin Cruising, Maisema Ruise ja Forssa Pick-Nick olivat suunnitelmissä jes, mut ei enää, koska hetkellä olen low-on-cash.
    Seuraavat Suomen suunnitelmat Aspenin kanssa ovat nyt syyskuun lopussa - Wovenhand keikka Helsinkissä ja sitten Yenkkiautonäyttelyn vierailimen.
     
    Muokattu: 4.8.2016
  7. FuryIII '71

    FuryIII '71 Double Gearhead

    Ryhmästä "Mobilisti - lehti vanhojen ajoneuvojen harrastajille". Vaatii muistaakseni pyynnön liittyä ryhmään.

    En tiedä minäkään mitä se "länttä" siellä linttapaskan perässä tarkoittaa.

    Kuvan ottanut henkilö epäili takaripustuksen pettäneen, mutta sen jälkeen eka kommentoija tosiaan "kehui" tuolla edellä mainitulla lauseella...

    Tässä linkki, en tiedä näkyykö: https://www.facebook.com/photo.php?fbid=10209790213100500&set=gm.10153824346357607&type=3&theater
     
  8. JarmoN

    JarmoN Gearhead

    DX ja FuryIII '71 tykkäävät tästä.
  9. Kahvipoika95

    Kahvipoika95 2nd gear

    On kyllä komee ja nätit straippaukset tehty! Käy ku nyrkki silmään :cool:

    Tuo ''linttapaskalänttä'' on joko kateellisen huuteluu tai sitte se on omalla tavallaan kohteliaisuus heh :D

    Instassa näkyny vähä materiaalia tästä autosta mutta onko missään esittely videoo tms? Ois ihan hienoo nähä videopätkää ''walk around'' tai jotain sinne päin. Kiinnostas nähä miltä tuo släntti kuullostaa noilla flowmastereilla :)

    Ja noihin ideoihin käyttää pinnavanteita niin kyllä vaan tulis astetta komeempi. Muistaa vaan valkosivut kumeihin :D
     
  10. JarmoN

    JarmoN Gearhead

    Joo, täytyy tehtä video myös, en ole ollut aikaa vielä.

    Ensi vuoden (tai ensi etappin) suunnitelmat lisäksi vanteeille ja pinner-white renkaille ovat korityöt ja sitten kokonainen kori flake-panel maalaus, sisustan tekeminen ja paljon muita "aksessuaareja". Mulla on myös minkäläisija ideoita mixatta vähän (mut tosi vähän) shakotan-fiilistä täällä, mut hetkellä on see vain juttu-tasolla ja katsotaan sitten kun työ on tehty :)
     
    Herje tykkää tästä.
  11. S.L

    S.L Double Gearhead

    Erilaisesta aihiosta hyvällä maulla tehty helvetin hieno, diggaan.
     
  12. NonSenCe

    NonSenCe Gearhead

    eikös se ole lähes shakotan nyt jo.. erittäin matala, hyvin vähän korimuutoksia vakiosta.

    kunhan ei mene bosozoku tyyliin niin hyvä. (ylimitoitetus levikkeet ja diffuusorit, erikoiset pitkät pakoputket)
     
  13. JarmoN

    JarmoN Gearhead

    Ei ei :)
    Se shakotan-fiilis täytyy olla ihan vähan, very mild. Just to give the idea of it. Miettiin etta peilit edenpäin ja näin, pienet muutokset. Täytyy tehdä mock-up ensimmäiseksi ja sitten nähdaan jos ne ideat voi onnistua.
     
  14. JarmoN

    JarmoN Gearhead

    Tällä vuodella olen ajanut noin 9000km Aspenin kanssa ja nyt täytyy tehta pienet rempaukset ja sitten korityöt ja täysin maalaus.

    Noin kuukausi sitten Wheelsbywovka (wheelsbywovka.com) otti pari räpsyä Air Morse One'sta.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    sleepercooler, leivonharri, Pertti K ja 7 muuta käyttäjää tykkäävät tästä.
  15. JarmoN

    JarmoN Gearhead

    October Rust

    [​IMG]
     
    leivonharri, Pertti K, FuryIII '71 ja 5 muuta käyttäjää tykkäävät tästä.
  16. jrasi

    jrasi Gearhead

    Tää on kyllä hieno... Melkein harmittaa, etten ostanut kaverilta Aspenia, kun olis halvalla saanut.

    Se oli kyllä siinä kunnossa, että varmaan harmittais enemmän, jos olis ostanut.
     
  17. JarmoN

    JarmoN Gearhead

    :D
     
  18. JarmoN

    JarmoN Gearhead

    Air Morse One sat for a year and eight months and got it back on the road just before the American Beauty Car Show in Haapsalu, Viro.
    It started with it's own battery and even the brakes were loose etc. So I got it warm, got the katsastus done and back on the road. The airride compressor has gotten weak though, so I need to figure that out in the future.

    This is the way it was sitting for all this time:
    [​IMG]

    First day at home and got the Supremes back on it
    [​IMG]



    I was tired of the old look and decided to go with the phase 2. This meant removing all the old striping and adding some accessories that I had in mind for a long time.

    So I started with removing the stripes. Used the nitro-solvent and steel-sponge to give it a bit roughed-out look. I already started to lay down some new panels and stripings on it.
    [​IMG]

    [​IMG]



    Next task was to finally change the old dash. I had the better one purchased from ebay already a few years ago, but was just being lazy, so now it was time.
    Before:
    [​IMG]

    After:
    [​IMG]



    Then I wanted to build the venetian blinds.
    These were the only tool I got for this job:
    [​IMG]

    [​IMG]

    Quality is not good, but it's OK to look from a distance :D
    [​IMG]

    [​IMG]

    [​IMG]
     
    palontie, leivonharri, Pertti K ja 2 muuta käyttäjää tykkäävät tästä.
  19. JarmoN

    JarmoN Gearhead

    I bought this vintage "Archer" rabbit ears antenna from the Yokohama Hot Rod Custom Show back in 2016, so now it was time to finally attach it to the car
    [​IMG]

    [​IMG]


    Also wanted a car TV. Been watching some vintage Panasonics and Sonys in eBay for a while but then bumped on a vintage Soviet piece on the local Estonian webmarket site - the Šilelis, made in Lithuania :D
    Looks exactly the part and as the Soviet occupation burdened us for 50 years then it's also a bit of history, so why not to use it instead of the "right" parts.
    [​IMG]

    Didn't have the room in front because of the airride controls (will change this setup in the future, once the phase 3 or 4 hits), so I installed it in front of the backseat.
    First it needed the stand, so good old diy-ethics came in handy once again:
    [​IMG]


    Mounted
    [​IMG]


    Righteous amount of angel hair will make everything cooler
    [​IMG]


    Added some more hairy bits while at it
    [​IMG]

    [​IMG]



    Must not forget about the dingleberries
    [​IMG]

    [​IMG]



    I've had the Felix doorlocks for a while now, but haven't taken a pic of 'em before.
    Bought 'em from the Yokohama Mooneyes store and found out later that these were produced only for the Asian markets.
    [​IMG]
     
    teippi-mikko, Pertti K, Aasi ja 1 muu tykkäävät tästä.
  20. JarmoN

    JarmoN Gearhead

    Just a few more photos of the fresh look from a week ago, minus the already started panel-stripings
    [​IMG]

    [​IMG]

    [​IMG]
     
    sleepercooler, palontie, leivonharri ja 5 muuta käyttäjää tykkäävät tästä.

Kerro tästä muillekin!