318poly vs pikkulohko kansitiiviste

Overdrive.fi on harrasteautoiluun keskittyvä verkkosivusto, joka tarjoaa sisältöä harrastajien ja rakentajien tarpeisiin. Epäasiallinen ja loukkaava sisältö, joka rikkoo sivuston käyttöehtoja, poistetaan. Näin eivät myöskään poliittinen keskustelu ja aiheet sinne kuulu. Harrastus on yhteinen poliittisesta kannasta riippumatta. Overdriven yleiset käyttöehdot löytyvät täältä, ja on hyvä muistaa, että jokainen keskustelija on rikos- ja vahingonkorvausoikeudellisessa vastuussa omien viestiensä sisällöstä.

Ketju osiossa 'Moottori', aloittaja Väne, 14.2.2012.

  1. Väne

    Väne Gearhead

  2. Shit-O-matic

    Shit-O-matic 1st gear

    Kyseleppä mieluummin tältä herralta Californiasta:

    Gary Pavlovich
    glpavlovich@cox.net

    Hän toimittaa viriosia Polykoneisiin. Olen itse ostellu osia häneltä. Tietää myös paljon kyseisistä moottoreista ja on niitä rakennellut paljon.

    Muunmuassa näitä osia löytyy:

    Here is a list of some High Performance and stock Poly parts for your consideration:



    Poly High Performance Cams



    256/.435 (stock FP31 dual quad Fury grind) 208@.050

    262/.460 214@.050” Hydraulic Cam

    264/.450 222@.050 or .480 Hot street grind 2000-6000rpm 224@.050

    274/.480 2500-6500rpm 230@.050

    284/.480 or .510 3000-7000rpm 240@.050

    294/.495 or .525 3500-7500rpm 260@.050

    The following is a list of parts and suggested machine work for a Poly 318 street motor in bold type; the other listed parts can be added if desired but pertain mainly to a High Performance 318 or Stroker Poly.


    Full engine rebuild gasket set $109
    4" Stroker crank $435

    Or 3.58” stroke crank for a 360” - $325 with core

    360 Stroker Poly w/3.58” crank uses cast fly cut pistons - approx. $485
    Heavy Duty steel SIR rods $325
    Milodon windage tray $65
    Custom ARP head and main studs w/nuts & washers $275
    ARP windage tray stud kit $125
    Main brgs. tri-metal/friction coated bearings $89
    Tri-metal rod brgs. friction coated $69
    Cam bearings $49

    Stock Oil Pump $49 for 1962 and later; early 56-61 Oil pump is $115
    High Volume Oil pump $69
    Carter Street/Strip 6psi mechanical fuel pump $87

    New LA Aluminum Timing Case Cover $109
    High Volume Flo-Kooler water pump $129
    High Flow 180deg. thermostat $19
    Brass freeze plug/cam plug/oil gallery plug set $49

    Double Roller timing chain set with gears $79

    or a billet set for $129
    Mopar Timing Chain Tensioner $59
    Mopar hardened distributor drive gear shaft $69
    Bronze distributor shaft bushing $14


    Custom Stainless Steel Oversize Valves - either 2.02/1.60" or 1.94/.160" $539

    NOTE: Oversize valves come with 11/32” narrow stems that are made with the improved single groove keeper and therefore require the change from stock Poly multi-groove keepers (valve locks) and retainers. The narrow 11/32” stems promote improved air/fuel flow and also require you to change to 11/32” narrow valve guides when machining your heads.

    Poly multi-groove keepers (valve locks) $59

    Single Groove Keepers (valve locks) $49

    Retainers $79

    Bronze 5/16” guides $79

    Unleaded Seats for Poly heads $63
    Stock 1.84/1.56" Poly valve set $269
    Stock 9 to 1 OEM Poly pistons $299
    Custom forged aluminum pistons w/pins, locks (suggest 10 to 1 ratio
    flat-tops) $850

    Iron Ring set $49
    Chrome Moly ring set $109


    High Performance shaft rocker assembly - hard chromed shafts/fully bushed &
    trued intake and exhaust rockers/improved lock-nut adjusters to maintain
    valve lash $298 w/core
    High Performance Poly Solid Camshaft $235 with your old cam as core.

    You can also use the 58 Fury dual quad camshaft profile 260/.460” (210@.050”)
    Suggest 264/.450” (222@.050“) 1800-5500rpm power band for street and Street/Strip Poly 318 builds, mild Stroker 360’s, and 274/.480“ (230@.050") 2500-6500 band or 284/.510 (240@.050" with 392-402” Stroker Polys)
    3000-7000 band +.

    There is a myriad of other cam profiles and one can custom grind for special applications…large Blowers, Pro-Chargers, fuel injection…
    Poly Solid Lifter set $110

    Poly Hydraulic Lifter set is $165
    Matching valve spring set $95

    New Poly pushrods for solid cams $79 set and Hyd. pushrods are $89 a set.

    Harmonic Dampner $109 stock or High Performance available as well…ie $379-435 BHJ…

    Strongly suggest a good port & rough polish for the heads - should reach
    211cfm @ .600" on the intake side and approx. 157cfm on the exhaust side;
    anywhere near these numbers is sufficient for 400-425HP; again, the superior
    Poly chamber design does not need the "advertised" mega-flow numbers given
    for all other heads, regardless of the mfgr. producing them.
    Use steel or bronze guides in the heads; steel does not seize valves/more
    forgiving; and good valve stem seals.
    Align bore/align hone the block with plates
    Dynamic balance the rotating assembly - should come in under 2000g
    Minor rod clearancing of the block needed for stroker applications
    Trial assembly and check rotating assembly again
    Sonic test the block and bore only enough to clean up the taper/ridge...not
    necessary to go .090"
    but you may if there is limited core shift to provide 135 minimum on major
    thrust of cylinders; prefer higher numbers but the superior nickel content
    in the Poly blocks is much stronger than any Ford or Chevy cores.

    Thank you,

    Gary Pavlovich

    619-572-3008 anytime

    Santee, CA


    $235 plus shpg. with your old cam as core.

    New Poly solid lifters or Hydraulic lifters are $105

    New Poly Solid or Hydraulic pushrods $85
     
  3. C-barge

    C-barge Gearhead

    Varmaan 15 vuotta sitten ollu jo äijän kans tekemisissä, oikeestaan sen ekasta stroker polyrakennelmasta lähtien. Ite vaan unohtanu siitä jo kaiken... :rotfl:
     
  4. Shit-O-matic

    Shit-O-matic 1st gear

    Juu se on kyllä maininnut sinut kun ollaan keskusteltu. Mun oli tarkotus tilata siltä stroker poly, mutta tuon kojelautapalon seurauksena ne fyrkat menikin sisustan uusimiseen.
     

Kerro tästä muillekin!