1.6 kent momentit

Ketju osiossa 'Moottori', aloittaja fe427, 20.2.2006.

  1. fe427

    fe427 Gearhead

    Eli paljonko pitää vetää kansipultteihin momenttia ja entä vauhtipyärän pultit?
     
  2. Kimmoh

    Kimmoh Gearhead

    Kansi; Stage1 28-42 Nm, stage2 70-76 Nm ja stage3 90-97 Nm.

    Vauhtipyörä; 68-76 Nm.
     
  3. fe427

    fe427 Gearhead

    kiitos paljon. :)
     
  4. 57 Firedome

    57 Firedome Gearhead

    Vanha aihe mutta tarvitsisi loputkin tiukkuudet. Moottori 1.5L.
     
  5. Googlella läpihengittävään:

    All settings quoted are in lb/ft and apply to both the 1300 and 1600 engines.

    Main bearing cap .............. 55 to 60

    Rod cap bolts ................... 31 to 35

    Crank pully ...................... 24 to 28

    Cam sprocket .................. 13 to 15

    Chain tensioner ............... 5 to 7

    Flywheel .......................... 50 to 56

    Clutch cover .................... 13 to 15

    Oil pump .......................... 13 to 15

    Rocker shaft ..................... 18 to 22

    Spark plugs ...................... 22 to 29

    Water pump ..................... 5 to 7

    Thermostat housing .......... 13 to 15

    Inlet manfold ................... 13 to 15

    Exhaust manifold .............. 15 to 18

    Rear cover ....................... 13 to 15

    Front cover ....................... 5 to 7


    Cylinder head 1................... 5

    2........................................ 21 to 31

    3........................................ 52 to 56

    4........................................ after 10 - 20 minutes 66 to 71 then re-torque after 15 minute warm up.


    Sump 1............................... 3 to 5

    2........................................ 6 to 8


    Sump plug ........................ 20 to 25


    Oil pressure switch ............ 10 to 11

    Fuel pump ........................ 12 to 15
     

Kerro tästä muillekin!